VoIP gateway IP400 version 5.01
Page 83
Called party num. in
/
out
.
• If the configured VoIP devices are also to have access to your gateway's
ISDN interfaces, define the voice transmission parameters (see section 6.1.6
“Voice transmission” from page 76).
6.2.1 Special features, when configuring innovaphone devices
innovaphone devices provide the option to register using their serial number. This
is always done if they are configured for operation with a gatekeeper but no alias
name has been configured in the profile. In this case for example, the IP tele-
phone tiptel innovaphone IP tries to log on with the
H.323 Name
IP200-03-
XX-XX
where
XX
-
XX
is taken from the last four digits of the IP telephone's serial
number. This makes it possible to operate with all IP telephones configured abso-
lutely identically.
• In the configuration applet, under
VOIP Interfaces
go to the
GWn
which
you have configured for the management of VoIP devices via RAS (see sec-
tion 6.2 “Management of VoIP devices via RAS (Gatekeeper)” from page 81).
• Create an appropriate Alias entry in the gatekeeper. The serial number is
entered in the
H.323 Name
field and the telephone's extension number is
defined in the
E.164
Address
field.
• If the IP telephone is also to be assigned a “descriptive” name, then set up a
further alias, with the same extension number as text, in front of the serial
number alias. Enter the desired name as
H.323 Name
.
To be able to use all of the available features, terminal devices should be managed
by the optional innovaphone PBX components.
Tip
Please note, that terminals, managed by the optional innovaphone PBX, do
not have to be configured in the
VoIP Interfaces
area.
