Page 94
VoIP gateway IP400 version 5.01
• If, by way of exception, the route for a
Map
entry is to be configured with a
different destination than that specified in the route's
Default call desti-
nation
field, you can select this from the
Destination
field of the
Map
.
• Leave all the remaining fields blank, in the normal case.
• To configure further routes, mark the route after which the new route is to be
inserted and click on the
Add route
button.
7.2.1 Manipulation of the calling number (CLI)
When switching calls, it may be necessary to manipulate the calling number, for
example to ensure a correct callback.
Fig. 28 on page 94 shows the configuration of a
0
as the access digit for an
exchange line.
Fig. 28 Configuration of an exchange access code
To ensure here that an exchange access digit of
0
is placed in front of the calling
number for all incoming calls via the exchange line, a
CGPN
(
calling party
number
) map must be created for the respective interface.
The basic procedure for this is described in section 5.2.7 “Dealing with the various
ISDN address types” from page 62.
Fig. 29 on page 95 shows how an additional
0
can be added as exchange access
