Chapter 5:
Console Operation
Output Channels
:
UM8
Processed Outputs
Eclipse User Guide
V1.0/1
159/ 380
Setting Geq Options for All Outputs
For the Display
Hold
, and Desk faders
Always
or
Hold SEL
options, you can apply the same setting across all Output
channels as follows:
1.
Set the option to the desired status – for example, set
the Desk faders
Hold SEL
to on (Yellow).
2.
Then click and hold on the option.
3.
Keep holding and the following confirmation box
appears:
4.
Press
OK
and the setting will be applied to all output
channels which have Graphic EQ (all UM8 outputs).
Setting Geq Options for All Pages of a Show
For the
ON
and Scale (
+/-6
or
+/-18
) buttons, you can apply the
same setting across all Pages within the console’s memory. For
example, to set the Graphic EQ on or off for a particular bus for
the entire show.
Note that this affects the Pages in memory only. To save the
changes permanently, make sure you save your File.
1.
Set the option to the desired status – for example, select
the
ON
button.
2.
Then click and hold on the option.
3.
Keep holding and a confirmation box appears.
4.
Press
OK
and the setting will be applied across all
Pages in memory.
