Innovatech Predator 3200, User Manual

          Innovatech Predator 3200 User Manual

OPERATION

Before starting:

1..

Check.the.floor.carefully.and.remove.all.bolts,.nails,.as.well.as.any.loose.material.that.could.get.caught.in.
the.machine.

2..

Fit.the.appropriate.tools.to.the.machine.

3..

Fit.splash.guard.to.the.right.height.

4..

Connect.the.power.supply..Make.sure.you.have.all.the.phases..May.have.to.check.with.volt.meter.

5..

If.you.are.grinding.dry,.connect.the.appropriate.vacuum.and.start.vacuum.before.starting.the.grinder.

NOTE:  IF  THE  WRONG  POWER  IS  SUPPLIED  TO  THE  GRINDER,  IT  WILL  DAMAGE  THE  
ELECTRICAL COMPONENTS IN THE INVERTERS.
Starting machine:

1..

Turn.main.power.switch.on.side.of.power.box.to.ON.

2..

Turn.forward.or.reverse.switch.left.of.right.

3..

Turn.manual.speed.pot.up.to.get.the.heads.turning.for.desired.speed..(If.heads.do.not.move,.you.may.have.
to.lean.on.handle.to.reduce.pressure.on.tools.

4..

Always.grip.handle.firmly.when.starting.machine..The.machine.will.always.move.from.side.to.side.with.
first.start.

5..

When.finished.with.grinding,.turn.off.machine.and.let.the.heads.come.to.a.complete.stop.before.tilting.
back.the.machine.

Changing of Tools:

1..

Before.working.on.the.grinder,.bring.the.motor.to.a.total.stop.and.disconnect.power.

2..

Tilt.machine.back.on.floor.

3..

Use.caution!.Tools.can.be.very.hot.from.grinding..Use.gloves.

4..

Use.special.tool.supplied.to.turn.center.of.tool.holder.to.remove.tool.plate.

5..

Replace.with.new.tool.plate.and.turn.to.lock.in.place.

6..

Lower.machine.back.down.and.re-adjust.splash.guard.is.necessary..Working.height.of.different.tools.varies.
depending.on.tools.and.wear.