Auto lens meter operation manual
13
Print and port setting
Yes,no
ID setting
Yes,no
Software type
Newest
4 Operation
4.1 Assembling
(1)to check the attached parts: after opening the package, to check all
the attached parts (according to the attached list).
(2)to find a smooth place without direct sunshine and put down machine
well.
(3)to connect with power supply: to plug the power output injection of
adapter to the power injection at the back of machine.
(4)to put the grounding terminal well.
4.2 Test
(1)to turn on the power switch, just gentle touching on switch.
(2)the test data should be 0D without any lens. To turn on the power so
check if everything is OK.
Note: if all the data showed on measurement menu are not 0, then it means
that the protecting glass is dirty, which is in lens base. To blow off the
dust by the balloon. If it is still dirty, then to wipe it with lens cloth.
It should be cleaned every short time. Be sure to move lens base up while
Summary of Contents for VIEWLIGHT DLR-700
Page 1: ......