15
Hair removal procedure
1. Before the procedure, please let the customer read the Informed Consent
Document.
2. Position the customer comfortably on the couch.
3. Put on gloves (latex, vinyl, or nitrile), a mask, and a cap.
4. Disinfect the protective glasses supplied in the package.
5. Put on protective glasses and get the customer to wear protective
glasses as well.
6. Disinfect the device applicator, using an antiseptic agent.
7. Prepare the body area intended for the hair removal procedure:
• if the hair length exceeds 1 to 2 mm shave the area with a trimmer, but
not with a razor;
• disinfect the area intended for hair removal using a skin antiseptic
agent (Estilodez, Diaseptic 30, etc.)
8. Turn on the machine and activate the applicator;
9. Release the first pulse sidewise, avoiding eye contact;
10. Start the procedure with power mode 1;
11. The laser working spot should be firmly against the skin during the
procedure;
12. Press the release button once to generate three pulses;
13. Position the laser working spot to evenly treat the area intended for hair
removal;
14. Handle the applicator, moving it a little to the previously treated area;
15. It is not recommended to treat the same area more than once.