7.5. PRESET
POSITION, REMEMBER, BAND, SWAP, FINE, SEARCH and
AUTO-SEARCH will display on the screen as below description:
7.5.1.Press or to select POSITION, and press
to set.
or
7.5.2.Press or to select REMEMBER, and press or to
select ON, this channel will be displayed when selected. When
REMEMBER is OFF, this channel will not be displayed.
7.5.3.
or
or
Press
to select BAND ,and then press
to
switch of V-L,V-H and U.
7.5.4.
or
or
Press
to select SWAP, then press
to select the
channel No . Press MENU to confirm SWAP.
7.5.5.
or to
or
Press
select FINE. Then press
to adjust
channel frenquency by little.
7.5.6.
or
or
Press
to select SEARCH. Then press
to start
searching forthward or backward.TV searching indicater bar will
turn to green from red after search TV signal. TV storage system
will identify as no signal if TV channel are on too weak signal.
7.5.7.
or
or
Press
to select AUTO-SEARCH. Press
to start
auto searching from channel 0 in turns of V-L , V-H and UHF.
Station of sufficient strength will be memorized and searching
stops.
-19-