Page 3 of 9 | 09152015
User Manual: 10 Gallon Smart Foam Unit | English
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Model No.: FI-10N-SM, FI-10NK-SM, FI-10NV-SM AND RELATED UNITS
REQUIREMENTS
Compressed air requirements
40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
Liquid temperature range
40-100˚F (4.4-37˚C)
Chemical compatibility
Chemical products used with this equipment must be formulated for this type of
application and compatible with unit materials and pump seals. For more information
on chemical compatibility, consult the manufacturer or SDS for your product or
contact our customer service department.
SPECIFICATIONS
Power type
Compressed air
Chemical pickup type
Draws from pre-mixed solution
Number of products unit can draw from
One product
Capacity
12.5 gallons (47.3 liters)
Discharge hose diameter/length
20 ft. (9.1 m) bonded hose, with 5/8 in. (15.9 mm) and 1/4 in. (6.4 mm) inside
diameter
Discharge wand/tip type
Ultra high molecular weight (UHMW) polyethylene handle and wand extension, with
65 fan tip and built-in zero tip
Output distance
With zero tip: 17-21 ft. (5.2 m – 6.4 m)
With fan tip (ST65150): 16-20 ft. (4.9 m – 6.1 m)
Output volume
With zero tip: 20-32 gal/min (75-121 l/min) of foam
With fan tip (ST65150): 20-32 gal/min (75-121 l/min) of foam
Flow rate*
2 gal/min (7.6 l/min)
Pump seals
Santoprene, Viton, or Kalrez
Wheel type
Two 10 inch non-marking wheels
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
