User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 38 of
95
4.10.5
Earth Bonding
It is very important that the NV200 Spectral is properly bonded to earth, using one
of the earth tabs. Earthing on the standard chassis can be affixed to any of the
screw mounting points at the side of the unit:
The TEBS cashbox has earthing points at the back of the chassis as shown below.
The plating on the chassis must be broken to create a proper earthing point on the
chassis, it is recommended to use a cutting screw but and tool that can cut away the
plating will suffice.
Lack of proper bonding can cause communication issues and other failures. The
resistance between the chassis and Earth should be less than 0.7Ω.
