User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 62 of
95
5
Cashbox
Unlocked
Issue an unlock command to the TEBS, physically unlock and relock
the unit ensuring the lock has been completely turned.
6
Currency
Mismatch
Remove the current TEBS bag and reinsert a new bag.
7
Firmware
Error
Contact ITL support.
3
1
Firmware
Checksum
Error
There has been an issue with the attempted download, retry the
download with the recovery section on validator manager, if this
fails arrange for the unit to be returned to the nearest repair
centre; details of which can be found on our website.
2
Interface
Checksum
Error
The firmware loaded doesn’t contain the primary interface from the
previous firmware. Download with the IF file containing the correct
protocol.
3
EEPROM
Checksum
Error
There has been an issue with the attempted download, retry the
download with the recovery section on validator manager, if this fails
arrange for the unit to be returned to the nearest repair centre;
details of which can be found on our website.
4
Dataset
Checksum
Error
4
1
Power
Supply too
Low
Check the voltage on your power supply is within the specified
voltage range as outlined in
If the voltage appears to be correct, check to ensure the power
supply voltage doesn’t vary by more than 10% un
der maximum
current draw.
2
Power
Supply too
High
Check the voltage on your power supply is within the specified
If the voltage appears to be correct, check to ensure the power
supply voltage doesn’t vary by more than 10% under maximum
current draw.
3
Card
Format
The data card inserted is incorrect, format the card using the latest
NVCardUtilities.
4
Payout
Reset
The Spectral Payout is in the process of resetting, wait for it to
recover.
