User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 63 of
95
5
1
Firmware
Mismatch
The Firmware on the device connected doesn’t match the firmware
on the NV200 Spectral. Ensure the Firmware supports the connected
device.
2
Payout Jam The spectral payout has encountered an issue and a note has
jammed, follow the steps as described in
4
Payout Jam
recovery in
progress
The spectral payout encountered a jam and is attempting to recover.
5 notes will be moved to the cashbox, from the payout. Once the unit
has completed this it will go back in service.
8.2
NV200 Spectral Module Flash Codes
Each additional module for the NV200 Spectral has its own flash codes, outlined in
the subsections below.
8.2.1
TEBS Lock Flash Codes
The TEBS cashbox can display a flash code on the lock cam.
Flashes
Indicated Status / Error
Recommended Action
Red
Blue
3
2
Camera not Responding
Arrange for the unit to be returned to the
nearest repair centre; details of which can be
found on our website.
3
3
EEPROM Error
3
4
TEBS Log CRC Error
Send the Clear TEBS Log command through
validator manager this will reset the logs and
the error should clear.
8.2.2
Spectral Payout Flash Codes
The LED on top of the Spectral Payout module can flash the following codes to
indicate its status and aid troubleshooting
Flashes
Indicated Status / Error
Long
Short
3
2
Sensor error
3
3
Tape error
3
4
Diverter Error
3
5
EEPROM Error
3
1
Other
Flashes
Indicated Status
Colour
Flash
Green
Slow
Waiting for host machine to enable the payout
module
Green
Fast
Idle
Blue
Fast
Busy
–
A payout/float/empty/pay-in is in progress
Turquoise
Fast
Waiting for NV200 Spectral to send the startup
command