User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 16 of
95
4
MECHANICAL INSTALLATION
4.1
Compatibility
4.1.1
Hardware Compatibility
4.1.1.1
Machine Mounting
Assuming the suitable bezel (and cashbox) type has been ordered the NV200
Spectral can be used as fitting replacement for the following ITL products only:
NV200
Innovative Technology Ltd. has a policy of continuous product improvement. Due to
design changes older model or product bezels (and cashboxes) may not be
compatible with the NV200 Spectral. Specifically, the NV200 Spectral head is not
backwards compatible with the NV200 cashbox and chassis.
The 2200 note cashbox also has a larger chassis which means that it is not a
suitable replacement for current installations.
However, new product deliveries always include a bezel (and cashbox) that must be
used.
Caution!
Only use bezels (and cashboxes)
shown in this manual
4.1.1.2
Machine Interfacing
By design the NV200 Spectral is pin to pin compatible with the suitable fitting
replacement products listed in
No changes to existing machine
harnessing are required.
4.1.1.3
Power Supply
It is vital that the NV200 Spectral is connected to a power supply able to provide the
required power environment. A weak power supply causes malfunctioning of the
NV200 Spectral such as note rejects or missing credits. If the NV200 Spectral is used
as a fitting replacement for an older model or product we recommend checking the
power supply specifications of the machine. The power supply of the machine might
be designed for the older model or product but not suitable for the NV200 Spectral.
The NV200 Spectral might have higher power consumption. Refer to
full power requirement details of the NV200 Spectral.
Caution!
A weak power supply may cause
malfunctioning!
