User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 45 of
95
The USB connector is a standard Type ‘B’ USB socket
which can be used for
programming the NV200 Spectral
–
a USB 2.0 compliant
Type ‘A’ to ‘B’ lead can be
used to do this.
The USB connection is not recommended for use in the final ‘live’
application.
6.3
User Interfaces
6.3.1.1
Dip Switches on the NV200 Spectral
The NV200 Spectral has a Dual Inline Package (DIP) switch bank that is used to set
the various options for the unit. A summary of the switch options is shown below:
Switch Option
Switch OFF (
)
Switch ON (
)
Default
Setting
1
Disable Barcode
Read enabled
Read disabled
OFF
2
Channel 1 Inhibit
Channel enabled
Channel disabled OFF
3
Channel 2 Inhibit
Channel enabled
Channel disabled OFF
4
Channel 3 Inhibit
Channel enabled
Channel disabled OFF
5
Channel 4 Inhibit
Channel enabled
Channel disabled OFF
6
Channel 5 Inhibit
Channel enabled
Channel disabled OFF
7
Channel 6 Inhibit
Channel enabled
Channel disabled OFF
8
Protocol Select
*Switches between the primary
(selected) protocol and SSP (used for
Programming). The switch needs to be
toggled ON and OFF to alternate
between the two. This will cause the
unit to reset.
OFF
On
Off
