Smart Coin System User Manual
Page
5
of
28
Copyright © Innovative Technology Ltd 2015
GA02033
Floating function
o
When the SCS receives the command to float to a required level, coins
are sent to the cash box until the requested float level remains in the
hopper
No need for additional sorters, hoppers or tubing
o
All coins validated by the coin feeder before entering the hopper. The
hopper will then send all unrequired coins (not needed for future
payments) to the cash box.
Built in security
o
Modulated coin exit sensor; 128 bit AES Encrypted SSP communications
(eSSP); locking option.
The SMART Hopper can be used to control a coin acceptor making machine
wiring and software implementation simpler. There is no need to have a
separate ccTalk bus to control the coin acceptor. Only 1 SSP bus is
required, the hopper then communicates with the coin acceptor using a
ccTalk connection.
2.3
Typical Applications for the Smart Coin System
The SMART Coin System can be used in a variety of situations where coin acceptance,
validation and recycling are needed. Some typical applications are:
•
Automated change transactions
•
AWP and SWP applications
•
Self-Serve and Retail
•
Kiosks
•
Casinos
•
Parking and Ticketing
•
Vending
