15
If
Power/Measure
button is pressed while
color coded ring still glows blue (i.e. within 3
seconds from last reading), the screen will
show “hold” as the thermometer is not ready
for measurement. Please wait until screen
returns to show previous reading. Press the
Power/Measure
button again. The screen
now should show
“- - - -” and blinking unit (°F
or °C). Repeat Step 3 to continue with
measurement.
Step 5: Power off
Press the
Power/Measure
button for about
3-4 seconds at any time to power off the
device.
Device will also power off automatically in 30
seconds if no activity is detected.
9.Temperature Taking Tips for
Accurate Measurement
1. To maintain hygiene and achieve accurate
measurement, make sure that a new, clean
ear probe cover is in place before each
measurement.
2. If the thermometer is accidentally used
without an ear probe cover, please clean
the sensor lens before use. (Refer to Care
and Cleaning section). A clean sensor lens
should be reflective and gleaming. If it looks
dull and lackluster, then it is dirty and
requires cleaning.
3. Make sure both user and thermometer
have remained at a constant ambient
temperature for at least 30 minutes. Recent
exposure of the thermometer to hot or cold