3
(70% Isopropyl) to clean the casing and the measuring probe.
Please wait 5-10 minutes for the alcohol to completely evaporate
before using the thermometer.
•
INV-DC200 is not waterproof. Please do not immerse it into the water
or other liquids.
•
Certain parts of the thermometer are fragile and must be lined
precisely to perform their functions. Do not drop the thermometer or
twist the thermometer sensor. The thermometer is not designed to
withstand intense impact or vibration.
•
Please do not use the product if the any part of the thermometer,
especially the sensor, shows any sign of damage. Do not attempt to
repair the product. Please contact your distributor immediately.
●
Operating Conditions:
Temperature: 50
°
F -104
°
F (10
°
C - 40
°
C)
Humidity: <80% RH, non-condensing
Atmospheric pressure: 860hPa to 1060hPa
●
Storage and Shipping Conditions:
Temperature: 14
°
F-140
°
F (-10
°
C - 60
°
C)
Humidity: 0 - 95% RH, non-condensing
Atmospheric pressure: 860hPa to 1060hPa
●
Battery Installation:
1. Put two AAA batteries into the battery compartment according to the
stated polarities.
2. Push the battery cover horizontally along the arrow to close.
Notes:
☆
If this is your first time using the thermometer, please remove the
protective plastic sheet .
☆
Batteries should be installed according to the stated polarities.
Otherwise, the device bracket might be damaged.
☆
Please remove the batteries if you are not planning to use the
thermometer for a long time.
Warnings
•
This is not a toy. Please keep the Dual mode infrared thermometer out
of children’s reach.
•
The infrared Dual mode infrared thermometer is not a replacement for
seeking medical assistance.
12
16.battery
Changeable for two 1.5V triple AAA batteries
17.Battery life
More than 3000 times
18.Accuracy for
clinical test
The maximum allowable error for clinical test is
specified in the formula below:
≦
0.6°F/0.3°C (for 95%)
Among which:
T1 and T2 represent temperature value for
thermometer under test respectively, Tref
represents the constant reference temperature
9.
Warranty and After-Sale Service
For enquiries, please email cs@innovogroups.com
The device is under warranty for one year after the date of acquisition. To
extend your warrant period for an additional 2 years, please go to
http://www.innovogroups.com and register your purchase.
Batteries, packaging, and any damage caused by improper use are not
under warranty.
10.
Symbols
Symbol
Description
The product is a Type BF device.
Attention! Please refer to this User Guide.
The action expressed in words beside the symbol is
prohibited.
Manufacturer information, including its name and
address
Terror
=
T1-Tref
T2-Tref
+
2