6.3 Remote control
• Open the battery compartment of the remote control (Fig. B).
• lnsert a type CR2032 button cell battery, observing polarity.
• Remove the contact breaker strip from the battery if present.
• Close the battery compartment. Make sure that the cover closes easily and tightly.
6.4 Connecting the power supply
ffl
Warning
CR2032
ot
fJ
..
• Only connect the product to a socket that has been approved for the device. The socket
must be installed close to the product and easily accessible.
• Do not continue to operate the device if it becomes visibly damaged. (This is mandatory tor
all products with 220 V mains connections.)
ill
Note
• The power supply unit is suitable for mains voltages of 100-240 V and therefore can be
used worldwide. Please note that a country-specific adapter may be necessary.
• Connect the enclosed power supply unit to a properly installed socket.
• Then connect the lead of the power supply unit to the DC In of the device.
Innovu BV - Bouwerij 68 - 1185 XX Amstelveen - tel: +31 (0)20 4539590 - www.innovu.nl