background image

Safety instructions

Everyone involved with the installation, operation and maintenance of this device must:
- Be qualified
- Be skilled
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the 
device or the included accessories be damaged, please contact your dealer for more 
information.
- Ensure that the device is in good working condition and is safe to operate. Please follow 
the advice and instructions as they are described in this user manual.

Damage caused by misuse and/or modifications made to the device are not covered by the 
warranty.
This device does not contain any parts that need to be repaired or replaced by the user. 
Should maintenance or repairs be necessary, they must be handled by a qualified 
technician.

Intended use

The intended use of the pole is vertical lifting and lowering of loads. The pole is intended to 
be mounted on a suitable subwoofer, and to lift and hold a suitable speaker. Use this 
product only as described in this user’s manual. Any other use is a use not intended by the 
manufacturer. Neither the manufacturer nor the supplier shall be liable for damages 
resulting from this. Users who use this equipment for purposes not intended by the 
manufacturer do so solely at their own risk.

When using the equipment for its intended use, the following parts, among others, must be 
observed:
- Stability of the pole
- Compliance with maximum load capacity of the pole (30 kg)
- Total weight of the speaker pole (3.9 kg) and speaker to be mounted should not exceed 
maximum loading capacity of the subwoofer
- Parts and mechanism should be undamaged
- Any cabling or wiring attached to the load lifted using this wind-up pole should not cause 
hinder in or around the pole and its lifting mechanism, or be subjected to excessive pulling 
tension or sharp bends as a result of insufficient cable lengths.
- Make sure all cabling or wiring attached to the pole or its load is laid out carefully to 
prevent people from tripping and causing personal injury, or causing the pole to tip over as 
a result of the sudden force on attached cabling. 

If a defect occurs in this technical product, the equipment must be taken down immediately. 
Further operation must be prohibited. Contact your dealer for an RMA (Return Merchandise 
Authorisation).

The information in this user manual is subject to change at any time without notice.

Versie: 
2.0

Date of creation and author’s initials: 
25-11-2019SM

Revisiedatum en initialen auteur: -

Summary of Contents for IVA CP Pro









Reviews: