20
6. Adjustment and setting up
6.1 Regulation of the height of cut
Height of cut depends on working conditions and volume of the
material. The height of cut can be regulated with the hydraulic system on
the tractor or/and with adjusted rear roller of the machine
(Fig. 12).
The min. height of cut should be between 1-3 cm. The machine always
run on the rear roller and not on the skids.
Fig. 11
Fig. 12
Working tools never
touch the ground. The
skids are only the
protection
against
injuries. They do not
touch the ground.
6.2 Offsetting
the machine has in standard
equipment a hydraulic offsetting
(Fig.13).
Fig.13
1-3 cm
Summary of Contents for EURO MINI
Page 32: ...32 ...