21
6.3 Belt tension adjustment
Appropriate belt tension is one of
conditions for optimal operating of the
machine and for long lasting of the
belts themselves. This can be easily
reached by automatic belt tension.
Fig. 14
Fig. 15
Tension the belts only when tractor is disconnected and
starting key taken out. Appropriate tension is reached,
when at pressure with the power of 100N (10 kg), a
deviation of the belt of 1,5 cm is reached.
Adjust correct belt tension with automatic belt tension,
position under the angle 20-22°
(Fig. 14)
. The angle is
defined with the arrow.
(Fig. 14/1)!
After 2 hours of operating it is necessary to tighten the
bolts on taper lock (Fig.16). Tighten the bolts in succession in
the circle. Repeat tightening at least four times, unless they
are tightened completely.
1
Summary of Contents for EURO MINI
Page 32: ...32 ...
