19
5.2. Attachment and detachment from the tractor
Before any operation check:
That the machine is in good condition,
That all guards are on proper places and in good condition,
That working blades are complete and undamaged,
That all greasing points are greased well and that in gearbox
is oil enough,
Appropriate tensioned belts
,
That rpm and direction of rotation on the drive axle
correspond to those on the machine.
To attack the machine to the tractor, bring the tractor lower lines near
the machine, to the points corresponding to the pins. Insert the pins and
secure them with the spring clips. Fit the top link, raise the machine to a
perpendicular position with the ground. Adjust the two tractor lower
linkage stabilizers thus fixing the machine to the tractor in a central
position. Connect the hydraulic cylinders and check if it works.
Before testing of hydraulic system move away blockade
for horisontal movement.
Before transport put on the blockade for horisontal movement. MKM
130,160 and 190 transport in the horisontal position. MKM 225 is
transported in a vertical position because of its total width (Fig 13/1).
Vertical transport position is secured with vertical hydraulic blockade.
Fig. 12
Fig. 13
Summary of Contents for MKM
Page 33: ...33 Fig 33 Fig 34 Fig 37 Fig 38 1 Fig 34 6 Fig 35 Fig 36 Fig 38 2 5 9 4 10 7 8 3 1 2 ...
Page 38: ...38 A ...
Page 39: ...39 B ...
