Version 1.0 09/08/2017
http://www.inorea.com
13
No.
Type
Explanation
is turned on.
4) Do not touch the internal circuit board and its components in order
to avoid the risk of electric shock after this unit is powered,
5) Do not touch internal circuit board and any parts after powering
off and within five minutes after keyboard indicator lamp goes
out,you must use the instrument to confirm that internal
capacitor has been discharged fully,otherwise there is a danger of
electric shock.
6) Body static electricity will seriously damage the internal MOS field-
effect transistors, etc.,if there are not anti-static measures, do not
touch the printed circuit board and IGBT internal device with
hand, otherwise it may cause a malfunction.
7) The ground terminal of the inverter (E or
)
shall be earthed
firmly according to the provisions of the National Electrical Safety
and other relevant standards. Do not shut down (power off) by
pulling switch,and only cut off the power until the motor stopping
operation.
8) It is required to add the optional input filter attachment so as to
meet CE standards
1-4.Scope of applications
※
This inverter only applies to typical industrial three-phase AC asynchronous motor.
※
This inverter can only be used in those occasions recognized by this company, an unapproved
use may result in fire, electric shock, explosion and other accidents.
※
If the inverter is used in such equipments (e.g: equipments for lifting persons,aviation systems,
safety equipment, etc.) and its malfunction may result in personal injury or even death. In this
case,please consult the manufacturer for your application.
Only the well-trained personnel can be allowed to operate this unit,
please carefully read the instructions on safety, installation, operation and
maintenance before use. The safe operation of this unit depends on proper
transport, installation, operation and maintenance!