UM_INAP375R Revision 1.2_A1
Inova Semiconductors Confidential
Page 7 of 37
User Manual
3.0 Hardware description
3.1 Board connectors
3.1.1 Standard connectors and interfaces
• 2 HDMI connectors for video input
• 1 USB2.0 connector for interfacing the boards’s
μ
C to the PC
• 1 RS232 for ISP (In Circuit Programming) of the
μ
C
• Single 9V..18V (Typ. 12V) DC power supply input to generate all board supplies
• APIX Serial High Speed Interface with either Rosenberger HSD or Molex MX49 connector
3.1.2 Connectors and interfaces for bench setups
• Direct power supply input to all LDOs (3.9V and 2.1V) allows to disable all DC/DC switcher (EMI tests)
• UART interface alternatively to USB2.0 with 3.3V supply to hook up a POF module (EMI tests)
• APIX I2S audio interface on pin header
• APIX SPI slave interlace on pin header
• APIX I2C interlace on pin header
• APIX GPIO interlace on pin header
• 2 Stereo audio line in
•
μ
C JTAG interface
•
μ
C MII interlace
3.1.3 Connectors and interfaces to expansion boards
• APIX pixel interface
• APIX data interface
• 12V, 3.3V and 1.8V power supply
•
μ
C ports
• I2C_0 and I2C_1 bus (from
μ
C)