Inovonics E 4080 Series Quick Start Manual Download

Page: 2 / 13

11/19/18 TN1114C © Inovonics, 2018 - www.inovonics.com

Introduction

This guide will walk through the process of connecting your E*4080

IP gateway to the Amazon Web Services (AWS) Internet of Things

(IoT) platform. It will assume that you already have an account with

AWS and permissions to access/change settings in the IoT

dashboard.

Contact Information

For questions, contact Inovonics technical support:

• E-mail: support@inovonics.com.
• Phone: (800) 782-2709; (303) 939-9336.

Materials Needed

• An AWS account.
• The ability to connect to Amazon servers outside of your

firewall.

• Traffic allowed on the following ports:



Port 9000 (TCP for OTA upgrades)



Port 123 (UDP for NTP sync)



Port 8883 (standard MQTT port)



Port 443 (HTTPS)

• USB flash drive.
• A computer.

Summary of Contents for E 4080 Series














Search results

Summary of Contents for E 4080 Series

Reviews:

Related manuals for E 4080 Series

Brands by name

Popular brands

Inovonics E 4080 Series, Quick Start Manual

Search results

Summary of Contents for E 4080 Series

Reviews:

Related manuals for E 4080 Series

Brands by name

Popular brands