INOXPA is not liable for any deterioration of the material caused by its transport or unpac-
king.
5.1. RECEPTION OF THE VALVE
5. Installation
When receipt the valve, check to see whether all the parts listed on the delivery slip are present:
- complete valve
- its components if any are supplied,
- instruction manual.
INOXPA inspects all its equipment before packaging. However, it cannot guarantee that the mer-
chandise arrives at the user intact.
When unpacking the valve:
- remove any possible traces of packaging from the valve or its parts,
- inspect the valve or the parts that comprise it for possible damage incurred during shipping,
- take all possible precautions against damage to the valve and its components.
5.2. TRANSPORT AND STORAGE
The buyer or user shall be liable for assembly, installation, start-up and operation of the
valve.
Take all possible precautions when transport and storage the valve to avoid damage it and its com-
ponents.
5.3. IDENTIFICATION OF THE VALVE
Each valve is inscribed with its fabrication number. Indicate de fabrication number on all documents
to refer to the valve.
II 2D Ex h IIIB T85 ºC...T200 ºC Db
II 2G Ex h IIB T6...T3 Gb
Type
Air
Serial
Size
Year
C. TELERS, 60 - 17820 BANYOLES
GIRONA (SPAIN) . www.inoxpa.com
INOXPA S.A.U.
R
10.260.32.0018
Installation
INOXPA S.A.U.
10.260.30.01EN · (A) 2022/09
8