Menu Operations
34
Time Display: Press [Vol◄/►] to switch this function “On” or “Off”.
NOTE:
If the current channel provides the correct time information,
you will see the current time after you entered “Local Time Setting”
menu. If the channel doesn’t provide time information, you have to
input the date and time information manually. The most channels
support the time signal.
Press [Exit] to leave the “Time” menu.
3.
Sleep Timer: Select “Sleep Timer” item and press [OK] to set the sleep
timer. You will see “Sleep timer OFF / Sleep timer 10 / Sleep timer 30 /
Sleep timer 60 / Sleep timer 90 / Sleep timer 120”.
If you set a sleep time, the system will change to standby mode after the
chosen time period.
5.4
OSD Setting
When you select “OSD Setting” you will
see a screen like beside:
1.
Subtitle Display: Press [Vol◄/►] to
select “Off”, “Standard” or “Teletext
Subtitle”. If the current channel has
subtitle information, it will be displayed
if
this
function
is
“Standard”
or
“Teletext Subtitle”. If this function is
“Off” subtitles won’t be displayed.
2.
OSD Timeout: This setting determines the duration the info window is
displayed on the screen when you change channels. Press [Vol◄/►] to set
the time between 1 to 10 seconds.
3.
Position: Press [Vol◄/►] select the position between top and bottom.
4.
OSD Transparency: With this parameter you can set the transparency of
the menus. Press [Vol◄/►] select the value between 10%, 20%, 30%,
40% and “Off”(means no transparency function).
5.
Load OSD Setting Default: If you want to reset your OSD settings to the
default settings then select this item and press [OK].
6.
Press [Exit] button to leave the “OSD Setting” menu.
