INRED MTK 450, Owner'S Manual

OPERATION

1. OPERATION

Turn on the power switch, insert the safety key into the right location with default program as NOR-
MAL PROG. After count down 321, motor starts immediately and treadmill starts to run

2. PROGRAM SELECTION (I have to confirm with R&D)

During P1 to P12 program,
a)  Before start, set the time first with a range 10:00-99:00 min and the default time is 30min. This can 

be realized by SPEED KNOB or SPEED+/- on the handlebar.

b)  Press [START] to run the treadmill. During running, the speed and incline in the current section can 

be adjusted, but it will be retrieve to the default value when run in the next section.

c) When the time count down to 0, the treadmill will stop automatically.

3. USER PROGRAM 

a)  When the treadmill stops, press PROG 13 times into user program. Press SPEED KNOB to adjust 

the speed and incline for each section with SPEED KNOB and INCLINE KNOB. When all the value is 
set, the time can be set with SPEED KNOB.

b)  There are 16 sections to set speed and incline in the user program. The range for speed is 1.0-

16.0km/h and for incline is 0-15. 

c) The range for time is 10-99min.
d)  After all setting finished, press START to run. During running, the speed and incline in the current 

section can be adjusted, but it will be retrieve to the default value when run in the next section.

e)  The treadmill will remember the set value. The treadmill will run with values set last time if there is 

no new parameters are set.

f) When the time count down to 0, the treadmill will stop automatically.

4. MODE PROGRAM

Press MODE into mode program to set time, distance and calories.
The parameters of time, distance and calories can be set by speed knob or speed+/-. Press speed knob 
to confirm after setting the parameters. After start, these three values begin to count down. When the 
value decreases to 0, then treadmill stops.

5. STOP THE TREADMILL

a) Press STOP to stop the treadmill.
b) Press PAUSEto stop the treadmill.
c) Take off the safety key to stop the treadmill.
d) Turn off the power switch to stop the treadmill.

17