PAGE 2
Enter each digit slowly and distinctly. The lock signals at each entry.
Factory-set opening code: 123456 (Change immediately after installation).
To Open the Safe
1
Enter the six-digit code.
eg the factory-set opening code: 123456
2
Turn keypad clockwise.
Turn keypad immediately a quarter turn (within 3 seconds
of entering the code)
3
Open safe.
Turn safe handle, if any, and open safe door.
Wrong Try Penalty
•
After 4 consecutive wrong code inputs, a blocking time of 5 minutes occurs.
During this blocking time the red LED flashes every 10 seconds and every input is
accompanied by a long signal tone. After the blocking time has passed 2 further
incorrect inputs will restart the blocking time.
To Close the Safe
1
Close the safe door.
2
Turn safe handle, if there is one.
3
Turn keypad anti-clockwise until upright.
4
Check the keypad and door are locked.
Changing a Code
Ensure door is open through the entire process (including testing).
Test the code by opening and closing the lock with the door in the open position.
USER INSTRUCTIONS
0
6
5
4
3
2
1
5
6
7
8
9
1
5
6
7
8
9
1
Press & hold ‘0’ until the red LED flashes permanently
Enter your old 6 digit code (example 654321)
Input your new 6 digit code (example 567891)
Repeat your new 6 digit code to confirm
Summary of Contents for Matrix 100
Page 1: ...Matrix 100 O PE R AT I N G I NS T RUC T I O NS ...
Page 4: ......