BCI Mfg Inc P.O. Box 1207 North Plains, OR 97133 info@insideride.com
Next lower the KICKR height
adjustment to the RD650C position and
install the lock pin. This setting works
for all KICKR models except the KICKR
20 (V5) which uses the RD 24 position to
maintain a level ride height.
F
old in the KICKR support
legs. The E-Flex is now
ready to receive the bike
onto the KICKR.
Use the normal KICKR installation procedure for attaching the bike. Leave
your front wheel on for now.
After the rear of the bike is attached to the KICKR, do not fully tighten
the bike axle. Leave it slightly loose so the bike can pivot up or down as the
fork stand is installed.
