BCI Mfg Inc P.O. Box 1207 North Plains, OR 97133 info@insideride.com
ASSEMBLE THE FORK STAND
The fork stand must be unfolded and locked in the upright position with 6
screws. Two of the screws are pre-installed. The remaining 4 screws are
supplied with the hex key and must be installed and tightened to proceed
safely.
ATTACHING THE FORK STAND
Remove your front wheel and place the E-flex fork stand under the bike’s
dropouts. Lower the fork onto the fork stand and fasten it with either your
thru axle or a standard quick release.
Point your fork straight ahead for proper alignment. Now tighten the rear
dropout and you are ready to ride. The KICKR will perform normally. The
E-flex does not alter the KICKR wattage performance.
