EN - 32 -
Replacing the light bulb
To replace the bulb in fridge compartment;
1- Unplug your fridge freezer.
2- Remove the cover of the box from the claws
using a screwdriver.
3- Replace with a bulb of maximum 15 Watts.
4- Install the cover.
5- Wait for 5 minutes before re-plugging and bring the thermostat to its original position.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
•
The original packages and foamed polystyrene (PS) can be retained if required.
•
During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
•
Before transporting or changing the installation position, all
the moving objects (ie,shelves,crisper…) should be taken
out or fixed with bands in order to prevent them from getting
damaged.
!
Carry your fridge in the upright position.
PART - 5.
Repositioning the door
•
It is not possible to change the opening direction of your refrigerator door, if the door
handles on your refrigerator are installed from the front surface of the door.
•
It is possible to change the opening direction of the door on models without any handles.
•
If the door opening direction of your refrigerator may be changed, you should contact the
nearest authorised service agent to have the opening direction changed.
BEFORE CALLING
FOR
AFTER SALES SERVICE
PART - 6.
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if;
•
There is no power,
• The thermostat setting is on “•” position ,
•
The general switch in your home is disconnected,
•
The socket is not faulty. To check this, plug the appliance in to another socket which you
know is working.
