NOTE:
You will now have 4 x rubber seals le? over. Our p, dispose
of these! Why? Because by using silicone as a seal it has allowed
you more scope for adjustment of glass, it will flex in the future
very important while shower cools a?er use and avoids potenal
sha8ering should you have not aligned feet correctly on tub or a
column has been fi8ed too ghtly. Experience of this model over
many hundreds sold proves our statement.
Gap at bo8om of glass angle fiCng to tub? Again no problem, it is
not crical to sit flush to tub and can easily be sealed on finishing.
Now just the door to hang, this is carried out taking the 4 x wheels
supplied, fit the top wheels into top holes, leave loose and now
offer up to top channel runner and place in posion. Taking the
bo8om wheels place through glass and locate bo8om of door in
wheel runner guide channel. You will note the door wheels are on
cams, simply adjust top or bo8om unl correct smooth running is
obtained. Tighten all. Place the rear water seal on the door and
the magnet seal on the leading edge in order it will grip to upright
magnet column fi8ed earlier in build. Now mount handle.
For the latest fing instrucons please visit
www.insigniarange.co.uk
For the latest fing instrucons please visit
www.insigniarange.co.uk
Top wheel in place with mag-
nec trim
Top wheels loose holding door
Door Handle
Bo8om door wheel fiCng
25 26
