10
NS-13T001 Insignia Flex™ Android Tablet
www.insigniaproducts.com
3
Plug the wall charger into a power outlet to start charging the battery.
When the battery is charging, the (battery charging) icon appears at
the bottom right corner of the screen if your tablet is turned on.
After the battery has been fully charged, the (full battery) icon
appears at the bottom right corner of the screen if your tablet is
turned on.
Caution:
Use only the included power adapter to charge your tablet's
battery. Even if a different brand of power adapter has the same type
USB port, using it may damage your tablet.
Notes:
•
If the battery does not charge using the included power adapter, use
a small tool (like a straightened paperclip) to press the RESET button
on the back of your tablet.
•
Battery performance depends on many factors, including the
network configuration, signal strength, temperature, features or
settings, items attached to ports, and usage of programs or
functions.
•
Your tablet's battery provides approximately six to eight hours of
video playback or several days of power depending on usage type.
Installing the microSD memory card
Your tablet’s internal storage capacity is 8 GB. You can install a microSD™
memory card with up to 32 GB to save more pictures, music, and
applications.
To install the microSD memory card:
1
Make sure that your tablet is turned off.
2
Locate the microSD memory card slot, then open the slot door.
3
Insert the microSD memory card into the slot with the narrow side of
the card pointing toward the slot and the label facing up.
4
Close the slot door.
For instructions on removing the microSD memory card, see “
.”
