www.insigniarange.com
Last Modified: 08/10/2015
10
Step 1
Attach the left hand pan to the left back panel.
Once you are happy with the alignment, run a bead of silicone up the
edge and along the bottom of the panels and screw together using the
ST20
Step 2
Now attach the large back panel to the column. Once you are happy with the
alignment, run a bead of silicone up the edge and along the bottom of the panels and
screw together using the
ST20
(please note, if your column has a rubber seal at the bottom , take the rubber off and
apply silicone inside the rubber and replace)
