www.insigniarange.com
Last Modified: 13/06/2017
13
Step 3
Now attach your inner uprights to your front fixed glass panels by inserting these over
the thin rubber seals as shown by the arrows in the image.
Next screw the inner uprights to your curved rails using the
ST25
screws.
(please note that the front uprights will need a pilot hole drilled before screwing)
Step 4
Now meet the front of the shower with the back panels and screw together using the
ST20
and
SW9
washers
screws, then continue to run a bead of
silicone
along the
-
inside of the front fixed glass
