www.insigniarange.com
Last Modified: 27/01/2017
13
Step 4
Now lock the back glass panel to the completed front frame in the position shown in
the image marked
“
1
”
Once you have met the back panel inside the front upright as per the close up image
walk the panel around to the position shown in the image marked
“
2
”
Now repeat for the other side
1
2
1
Step 5
Now you have locked the two back panels in position, align the back
panels to the central column. Once you are happy with the alignment,
run a bead of silicone up the edge of the column and along the bottom of
the panels and screw all parts together using the
ST20
screws and
SW9
Washers as per the image.
