background image

 

www.insigniarange.com

 

Last Modified: 03/04/2018

 

 04 

ASSEMBLY AND PLUMBING

 

THIS PRODUCT BUILD IS RATED SUITABLE FOR DIY PURPOSES PROVIDING THE CUSTOMER IS OF ABOVE AVERAGE SKILL AND FEELS CONFIDENT IN 

THEIR ABILITY. ONLY YOU THE CUSTOMER WILL KNOW THIS SO BEFORE ANY ATTEMPT IS MADE TO ASSEMBLE, READ THROUGH THE FOLLOWING 

PAGES IN DETAIL THEN DECIDE. IF YOU HAVE ANY DOUBT USE THE SERVICES OF A PROFESSIONAL. IN PICKING SUCH, ALLOW THEM TO DECIDE IF 

THEY ARE CAPABLE OF BUILD BY FIRST SHOWING THESE INSTRUCTIONS TO THEM.  ALWAYS GET THREE QUOTES.

 

REMEMBER THE BEST IS NOT ALWAYS THE CHEAPEST!

 

REMEMBER PLUMBERS PLUMB! 90% OF THIS JOB IS NOT PLUMBING! 

 

 

DUE TO THE NATURE OF THIS PRODUCT WE HIGHLY ADVISE THE PURCHASE AND FITTING OF A WATER SOFTENER

 

(PLEASE NOTE LIMESCALE BUILD UP MAY CAUSE DAMAGE TO YOUR SHOWER AND WILL NOT BE COVERED UNDER WARRANTY)

 

 

ELECTRICAL CONNECTION TO HOUSE MAINS

 

WHEN YOUR ITEM IS ASSEMBLED ALWAYS USE THE SERVICES OF A FULLY QUALIFIED ELECTRICAN COMPANY TO COMPLETE THE CONNECTION FROM 

SHOWER TO THE HOUSE SUPPLY. LAWS DEMAND IN MANY CASES YOU DO THIS AND YOUR WARRANTY IS VOID IN REGARDS TO THE ELECTRICAL 

ITEMS IF THIS IS NOT UNDERTAKEN. 

 

YOURS AND OTHERS SAFETY IS PARAMOUNT. 

NEVER ATTEMPT THIS YOURSELF!

 

 

REMEMBER:

 

These showers are designed to be free standing and movable from their location should you have the need to replace anything. 

ALWAYS USE  

Flexible braided water 

inlet pipes (not supplied) at least a metre long (not central heating plastic type!) 

 

Always use a flexible waste pipe from your house supply to the shower . 

 

NEVER FIX 

with rigid pipes, 

NEVER FIX 

the unit to the wall.

 

 

DURING BUILD, LIKE ALL SHOWERS CORRECT SEALING IS IMPERATIVE.

 

If you are using Insignia

s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the RubberGum to fail and 

will not adhere as intended.

 

ATTENTION

 

ALWAYS FIT EASY TO GET TO  ISOLATION TAPS ON BOTH THE HOT AND COLD WATER SUPPLY (NOT SUPPLIED). JUST LIKE A 

DISHWASHER OR WASHING MACHINE, THIS PRODUCT

 

MUST BE ISOLATED WHEN NOT IN USE.

 

FLEXIBLE

 

SUPPLY

 

HOSES (NOT SUPPLIED) COUPLE

 

HERE AS ORIGIN OF SUPPLY

   

Summary of Contents for INS003

























Reviews: