www.insigniarange.com
Last Modified: 13/06/2017
13
Step 4
Now lock the back glass panel to the completed front frame in the position shown in
the image marked
“
1
”
Once you have met the back panel inside the front upright as per the close up image
walk the panel around to the position shown in the image marked
“
2
”
Now repeat for the other side
1
2
1
Step 5
Now you have locked the two back panels in position, align the back panels to the
central column. Once you are happy with the alignment, run a bead of
silicone
up
the edge of the column and
Rubbergum
along the bottom of the panels and screw
all parts together using the
ST20
screws and
SW9
Washers as per the image.
(
please note
, if your column has a rubber seal at the bottom , take the rubber
off and apply silicone inside the rubber and replace)