www.insigniarange.com
Last Modified: 13/06/2017
14
Step 6
Align the roof with your shower walls and using the
ST25
screws fix the back walls to
the roof by screwing upwards from the rear of the shower.
NOTE: Please start this procedure by first screwing the
ST25
screw at one of the front
corners (highlighted in the image with the numbers) and then pull the roof to the opposite
front corner and screw into position. This will allow you to then simply use the remaining
ST25 screws as intended .
If a small gap exists
silicone seal later
Step 7
Fit the adjustable wheels to the top and bottom of the glass doors and ensure
the wheels are at their lowest position and hang on the inner curved rails with
the wheels facing the outside of the glass.
Once all wheels are fitted and on the rails you can adjust the wheels by turning
the plastic bolt clockwise in which in turn will pull the wheels towards the track
ensuring a secure a tight fit.
Now grease the track to ensure a smooth and long lasting operation
(not supplied)
1
2
