www.insigniarange.com
Last Modified: 18/12/2017
18
Door Seals
Magnetic Seal: Push the magnetic door seal on the handle side of the glass door ensuring
this is tightly fitted.
Rear Door Seal: Place the rear door seal on the opposite side to the magnetic strip ensuring
the flap is facing the fixed glass panel
Thermostatic Probe
Insert the chrome sleeve into the hole situated below the control panel and secure
in place with the retaining nut. Insert the rubber grommet into the sleeve and push
the probe through from the rear of the cabin ensuring the probe protrudes no more
than 6mm. Place a small amount of silicone behind to fully secure in to place.
Ozone (o3)
Unscrew the chrome pepper pot end and drop the white box
upside down into the rear hole as shown in the image. Now
from the inside of the shower re
-
attach the chrome pepper
pot end and tighten.
Monsoon Head
Attach the grey hose from your valve to the inner black
tube using PTFE tape (please note this only needs to be
hand tight. Over tightening will snap/damage the inner
black tube)
Handle
Ensuring that
the inner
thread is pro-
truding out
from the han-
dle far enough, place the handle
on the outside of the door and
