insigniarange.com
Last Modified: 13/06/2017
12
Step 3
Apply
silicone
to the specified area’s as shown and now fix
together and screw the large back glass panel to the column using the
ST20
screws.
Step 2
(please note, if your column has a rubber seal at the bottom , take the rubber off
and apply
silicone
inside the rubber and replace)
Again,
Once you have completed a dry run
and are happy, Then continue to ap-
ply the silicone to the specified area of the control column and place next to the an-
gled back glass panel and fix together using the
ST20
screws.
Step 2
Step 3