insigniarange.com
Last Modified: 08/02/2018
24
Roof Lights
The roof lights come packed in with your accessories and need to be inserted on site. On
top of the roof there are 24 nuts, which simply need tightening by hand. Once this is done,
the lights simply push onto the fitting. Start on one side with the light closest to the middle as
shown below. Follow the lights around in the order shown, as this allows a consistent path
around the entire roof, and will leave you placing the last light next to the first light. This is
important as the connection for the lights feeds up onto the roof, and you need your starting
point and finishing point to be as close as possible.
Please Note: When connecting the roof LED lights to the electric box, only the male
connection is needed, leaving the female connection hidden away under the roof cover.
2. Tighten Nuts
1. Insert Lights
