www.insigniarange.com
Last Modified: 13/09/2017
19
Shelf
Fix the chrome floating shelf brackets to your glass back panel by using the provided screws. Now attach the chrome tubed bars to your glass shelf as illustrated in the
below image. Next slide the shelf into your shelf brackets and secure by tightening the grub screw situated on the bottom of the bracket.
Accessory Installation
Please Note
Ensure all grey backing film on the rear of the glass panels are pierced through the existing glass holes
with a knife to provide an efficient smooth fitting and location of the accessories. We recommend using
a screwdriver on the smaller holes.
Thermostatic Probe
Insert the chrome sleeve into the hole situated below the control panel and secure in
place with the retaining nut. Insert the rubber grommet into the sleeve and push the
probe through from the rear of the cabin ensuring the probe protrudes no more than
6mm. Place a small amount of silicone behind to fully secure in to place.
Please see your AMI system installation guide for further details
