www.insigniarange.com
Last Modified: 08/02/2018
11
TO START
Make sure you have a clear space, remember when finished and in place you need access to check your build and able to pull the shower out
for servicing or should you have the need to replace anything!
Take the shower tub and remove all the protective wrapping and fit the waste. In the side of the waste supplied in the optional fitting kit you will
notice a spigot not seen on an ordinary waste. In most cases this is blanked yet should you have a steam version you need to gently drill this
out as this item is for the steam generator drainage and will be connected in the instructions later.
Now please level the tray by firstly placing the tray in its final location and then using a spirit level, adjust the tray feet accordingly. Once you
are happy with the levelling of the tray, you can pull it out to begin the main construction.
