www.insigniarange.com
Last Modified: 08/02/2018
13
Step 4
Attach the right glass panel to the right column (with control panel) using the
M4 NUT
AND BOLT
and place a bead of
silicone
between the 2 panels and
Rubbergum
along the bottom of the tray.
Step 3
The next step is to attach the remaining column (with control panel) to back mir-
rored panel using the
M4 NUT AND BOLT
as shown in the picture to the left and
again ensure a bead of
silicone
is placed between the panels and
Rubbergum
is
applied under the bottom of the control panel.