www.insigniashowers.com
Last Modified: 21/12/2021
22
Button 1 (Steam)
Press to activate the steam function. Press again to turn the steam function off.
Button 2 (Time/Temp)
Press to display temp, then cycle through desired temperature setting (max 60°C) using up
and down arrows (Buttons 5/11). Press again to display time, then cycle through desired
time setting (max 99 mins) using up and down arrows (Buttons 5/11).
Button 3 (Lights)
Press to activate the lights. The lights have 4 colour settings—Red, Green, Blue
and White. Press the light button to change colour.
Button 4 (Fan)
Press to turn the fan on, press again to turn it to auto and then a third time to turn
it off.
Button 5/11 (Up and Down Arrows)
Use to cycle up or down through various setting options. Changes volume when
audio is playing.
Button 6 (Audio Mode)
Press to cycle through the audio options, Radio/MP3/Bluetooth or AUX. To connect
the Bluetooth press the Audio function (Button 10) until
‘
BT
’
is shown on the control
panel. Pair the sauna with your device. Once connected a tone will signify the
connection has been successful and the Bluetooth icon showing on the panel
interface.
Button 7/8 (Far Infrared Sauna)
Use this button to start the heaters for the sauna session. One button operates the
two heaters on the left, the other button the two heaters on the right. (
Note:
the
sauna cannot work at the same time as the steam)
Steam Control Panel Instructions
1
2
3
4
5
6
7
8
9
10
11
12
Button 9 (Play/Pause)
Use to Play/Pause music through various settings. When searching and tuning
the radio, use to save a desired frequency to a specific channel.
Button 10 (SET)
Press and use the arrows (Button 5/11) to manually search. Hold to tune radio stations
automatically. When listening to Bluetooth audio, press set in order to allow the
arrows to change track instead of volume.
Button 12 (Power)
Use to power the control panel on or off. Also use to unlock he panel (enters lock mode
automatically after 60 seconds of inactivity).
