Insignia NS-1UCDVD, User Manual

8

Insignia NS-1UCDVD DVD Player

www.insignia-products.com

•

For Video and S-VIDEO connections, 
resolution must be set to 480i or 480p; 
however, VIDEO OUT is always at 480i 
standard resolution.

•

For 720p and 1080i resolution on the 
component video out, only non-copy 
protected discs can be played back.If the 
disc is copy protected, it will be displayed 
at the 480p resolution without HDMI cable 
connection. With HDMI cable connection, 
the picture may not be display properly.

Connecting your player to optional audio 
equipment

You can connect your player to an external 
source to enjoy high quality stereo sound from 
your DVD player.

To connect your player to optional audio 
equipment:

1 Amplifier equipped with 2-channel analog 

stereo or Dolby Pro Logic ll / Pro Logic:

Use audio cables (

A

) to connect the left and 

right 

AUDIO OUT

 jacks on the DVD player to 

the audio left and right 

IN 

jacks on your 

amplifier, receiver, or stereo system.

2 Amplifier equipped with 2-channel digital 

stereo (PCM) or audio/video receiver 
equipped with a multi-channel decoder 
(Dolby Digital™, MPEG 2, or DTS): 

Use an optional 

OPTICAL O or COAXIAL X

(

A

) digital audio cable to connect one of the 

DVD player’s OPTICAL O or COAXIAL X 

DIGITAL AUDIO OUT

 jacks to the 

corresponding OPTICAL O or COAXIAL X 
jack on your amplifier. 

3 Digital multi-channel sound:

A digital multi-channel connection using a 
multi-channel audio/video receiver that 
supports one or more of the audio formats 
supported by your DVD player such as 
MPEG 2, Dolby Digital and DTS, provides the 
best sound quality. Check the owner’s 
manual for your receiver and the logos on the 
front of the receiver to verify the type of 
system you are using.

Using your DVD player

Using your remote control

Accessing DVD player features using your remote 
control buttons

All features of your DVD player can be accessed 
using the remote control. Some functions work 
with all types of discs, while some features work 
only with certain types of discs. 

To access DVD features:

1

Press the button that corresponds to the 
operation desired.

2

Press the 

 or 

 button to select a menu.

3

Press 

 to enter a sub menu or press 

 to 

return to the previous menu.

4

Press the 

 or 

 button to select a sub 

menu if necessary, then press 

ENTER

 to 

confirm your selection.

The following table specifies the feature 
operations and the type of discs required for 
the feature to work.

Note

This DVD player has been manufactured under 
license from Dolby Laboratories. “Dolby”, “Pro 
Logic” and the double-D symbol are trademarks of 
Dolby Laboratories. DTS and DTS Digital Out are 
trademarks of Digital Theater Systems, Inc. 

Rear of DVD player

Amplifier (Receiver)

Note

If the audio format of the digital output does not 
match the capabilities of your receiver, the 
receiver produces a strong, distorted sound or no 
sound at all. 
Six Channel Digital Surround Sound via a digital 
connection can only be obtained if your receiver is 
equipped with a digital multi-channel decoder.

Button

Operation

Type of disc

OPEN/CLOSE 

Opens or closes the disc tray.

All

PAUSE/STEP

During playback, press to 
pause play.
Press repeatedly to play 
frame-by-frame.

All

SKIP 

During playback, press 

to go to the next chapter/track 
or press 

to return to the 

beginning of the currently 
playing chapter/track.
Press briefly twice to step back 
to the previous chapter/track.

DVD

SCAN

During playback, press 
repeatedly to select the desired 
scan speed.
DVD discs have four scan 
speeds.
MP3 and audio CD discs have 
three scan speeds.

DVD
Audio CD 
(ACD)
MP3