74
20" 720p 60Hz LED DVD Combo TV
www.insigniaproducts.com
General
Trouble
programming
your existing
universal
remote
control.
• See instructions in
page
• Codes are subject to change. For
up-to-date codes, go to
Viewing universal remote control
codes
on page
, or visit
www.insigniaproducts.com/remotecodes
• Replace dead batteries with new
batteries.
• Refer to the User Guide that
accompanied your universal remote
control and contact the
manufacturer if problems persist.
Problem
Solution
No power.
• Make sure that the power adapter is
plugged into a working outlet.
• Unplug the power adapter, wait 60
seconds, then plug the adapter back
in and turn on your TV.
• Other devices (for example, a
surround sound receiver, external
speakers, fans, or hair dryers) may
be interfering with your TV. Try
turning off one device at a time to
determine which device is causing
interference. After you have
determined which device is causing
interference, move it further from
the TV to eliminate the interference.
“No signal”
error message
is displayed.
• Press
INPUT
and make sure that you
have selected the correct input for
the device or service you are trying
to use.
• If you are using a cable or satellite
box, use the remote that came with
that box to change channels.
After Auto
Channel
Search, there
are no
channels.
• Reception can vary by channel
depending on the broadcast power
level of a given station. Contact your
cable or satellite TV provider.
• Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
• Try replacing the cable between the
antenna/cable or cable/satellite box
and your TV.
When I press
INPUT
, I
cannot select
my device (it is
grayed out).
• Turn on the device. Your TV
automatically detects and displays
which video jacks have devices
connected to them when the
devices are turned on.
• Turn off Auto Input Sensing. See
Turning Input Sensor on or off
page
Problem
Solution
One or more
channels do
not display.
• Make sure that the channels are not
blocked. See
on page
.
• Make sure that the channels are not
hidden. The channel may have been
deleted from the channel list. You
can tune to the channel by pressing
the number buttons or you can add
the channel back to the channel list.
See
on page
.
• If you are using a cable or satellite
box, use the remote that came with
that box to change channels.
• Press
INPUT
and make sure that you
have selected the correct input for
the device or service you are trying
to use.
• If you are using an antenna, the
digital channel signal may be low. To
check the digital channel signal
strength, see
on page
Password is
lost.
• Enter
9999
to access parental
controls, then set a new password.
See
on page
.
Some settings
cannot be
accessed.
• If a setting is grayed, the setting is
not available in the current video
input mode (for example TV mode).
Change to a different video input
source. See
on page
TV cabinet
creaks.
• When the TV is in use, the
temperature rises naturally and may
cause the cabinet to expand or
contract which can cause a creaking
noise. This is not a malfunction.
Control
buttons do
not work.
• Make sure that the
Button Lock
option is set to
Off
. See
on page
• Unplug the power adapter, wait a
few seconds, then plug the adapter
back in and turn on your TV.
TV keeps
turning off.
• Make sure that the sleep timer is not
turned on. See
on page
A retail
banner is
displayed.
• You selected
Store Display Mode
when you ran the
Easy Setup
wizard.
Run the
Easy Setup
wizard and select
Home User Mode
on the
Viewing
Environment
screen. See
on page
Problem
Solution
