7
NS-32D220NA16 Insignia 32" 720p 60Hz LED TV
www.insigniaproducts.com
Installing a wall-mount bracket
1
Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
2
If the TV stands are installed, remove the screws that secure the stands to the TV screen.
3
Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that
came with the wall-mount bracket for information about which screws to use and how to correctly hang your TV.
Warning
• Your TV has four VESA mounting holes on the back. If you attach a
wall-mount bracket to the back of your TV,
the bracket must be
securely attached, using all four holes. If you do not use all four
mounting holes
, your TV may fall and cause property damage or
personal injury. See the documentation that came with your wall mount
for complete mounting instructions.
• This TV is intended to be supported by a UL Listed wall mount bracket
with suitable weight/load. (See “
.)
Notes
• The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take type M4 screws.
7.87 in. (200 mm)
3.
94 in
. (1
00 mm
)
