29
NS-40DR420NA16/NS-48DR420NA16
www.insigniaproducts.com
ARC jack
Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or
sound bar.
1
Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
2
Connect an HDMI cable (not provided) to the
HDMI1 (ARC)
jack on the side of your TV and to the
HDMI IN
jack on
the digital speaker system or sound bar.
3
Plug your TV’s power cord into a power outlet, then turn on your TV.
4
Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5
To turn off your TV speakers, on the Home menu, press or to highlight
Settings
, then press
OK
. Highlight
Audio
, then press
OK
. Highlight
TV speakers
, then press
OK
. Press
OK
to remove the check from the
TV speakers
enabled
check box.
6
To configure the
HDMI1 (ARC)
jack to output sound to an ARC device, on the Home menu, press or to highlight
Settings
, then press
OK
. Highlight
System
, then press
OK
. Highlight
Control other devices (CEC)
, then press
OK
.
Highlight
HDMI ARC
, then press
OK
to check the box.
On your TV
ARC audio device
Sound bar
HDMI cable
connector
HDMI1 (ARC)
jack
Side of TV
HDMI cable